1, small size, light weight: Due to metalized polypropylene membrane as medium, size, weight of only older products, 1 / 4 and 1 / 5. 2, low loss: less than 0.1% of actual value, so the capacitorâs own low energy consumption, less heat, low temperature, long service life, good energy-saving effect.
3, excellent self-healing properties: over-voltage caused by the media, local self-healing breakdown quickly and resume their normal work, so that greatly improved reliability.
4, Security: built-in self-discharge resistance and the device. Capacitor discharge resistor can automatically vent let go of power brought; when the capacitor fails, the safety device in time to disconnect the power, to avoid the failure of further development, to ensure safe use.
5, no oil spill: The use of advanced semi-solid capacitor impregnant, drop melting point higher than 70 Â°C, in the course is not spill to avoid environmental pollution, the capacitor will not result in oil loss and failure. Primary Specifications conditions: ambient temperature -25 Â°C ~ +50 Â°C, humidity â¤ 85%, an altitude of 2000 meters. Rated voltage: 250VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC. Rated capacity: 1 ~ 100kvar. Capacity tolerance: -5 ~ +10% Dissipation factor: rated voltage in the frequency, 20 Â°C when tgÎ´ â¤ 0.1%. AC withstand voltage: 2.15 times rated voltage between poles 10 seconds, most shell between 3kV10 seconds. Maximum allowable over-voltage: 1.10 times rated voltage. Maximum allowable over-current: 1.30 multiples of the rated current. Self-discharge characteristics: plus 2 Un capacitor DC voltage, disconnect the power after three minutes, the remaining voltage down to 75V or less.
Standard: GB12747-2004 IEC60831-1996
1.UL,CE ,TUV,CQC,CCC,ISO9001 Certificates
2.More than 11 years, manufacture experience
3.75% of our products are exported to Europe,North, south America,Africa and Asian other countries.
4.Factory Size:6500 m2 .
5.Strong technological capacity,advanced production testing equipment.